Structured Cabling & Network Cabling — Cat6/Cat6A

Scope

What we install

Cabling

Copper & fibre

Cat6 & Cat6A copper
OM3/OM4 & single-mode fibre backbone
Horizontal runs to every work point
Riser & inter-floor links
Containment shared with power cabling

Racks & termination

Tidy and consistent

Wall & floor-standing racks
Patch panels & cable management
Switch & UPS mounting
Labelling at both ends
Strain-relieved, dressed properly

Testing & handover

Documented

Certified link testing (wire map, length, loss)
Fibre OTDR / power meter where relevant
Test report per port
As-built record & port schedule

Who it’s for

Where the cabling matters

Office fit-outs

A new floor, a relocation or a reconfiguration.

Factories & warehouses

Office, weighbridge, production terminals and access points.

Server & comms rooms

Rack build, backbone, and tidy-up of legacy cabling.

How we work

From point count to certified results.

STEP 1

Walk-through

Point count, routes, rack location and containment.

STEP 2

Quote

Per point, plus rack, fibre and testing.

STEP 3

Installation

Cabling, termination, rack build and labelling.

STEP 4

Test & hand over

Certified results per port and an as-built port schedule.

One contractor

Data, power and security cabling together

Running the data cabling, the power containment and the CCTV or door-access cabling as one job keeps the trays tidy, keeps the cost down, and puts one contractor in charge of all of it — with a single as-built record at the end.

FAQ

Frequently asked questions

Cat6 or Cat6A?

Cat6 is fine for most offices at 1 Gbps and short 10 Gbps runs. Cat6A is worth it for longer 10 Gbps links, dense Wi-Fi 6/6E access points, or if you want headroom for years. We advise per site.

Do I get test results for the cabling?

Yes. Every port is tested and you get a report — wire map, length, insertion loss — plus an as-built drawing and port schedule, so faults are easy to trace later.

Can you tidy up an existing messy rack?

Yes. We re-terminate, re-label and re-dress the rack, add cable management, and give you a current port schedule. Often done alongside a small expansion.

Do you do fibre between buildings or floors?

Yes — multimode or single-mode backbone, terminated and tested, with the containment and any riser work handled.

Can the same job include CCTV and door-access cabling?

Yes, and it usually should — running it together keeps the containment tidy and the cost down, with one contractor responsible for all of it.

Ask us about structured cabling

Fill in the short form — we open WhatsApp with your details prefilled. Or WhatsApp / call us directly.

New floor or a messy rack? We’ll sort the cabling.

Free site visit & quote · registered contractor · tested & documented.

WhatsApp us Call us

Kuala Lumpur · Petaling Jaya · Shah Alam · Klang · Puchong · Kajang · Cheras · Seremban

Structured & network cabling for offices and factories