Elektrika ST-registered contractor
EN BM
Contact us →

Services · Lightning

Lightning protection and surge protection

Malaysia has some of the highest lightning activity in the world. We install penangkal petir systems — air terminals, down conductors, earthing and surge protection — and work with a specialist partner for the formal lightning risk assessment.

Scope of work

Protecting the structure and the equipment inside it

External protection

Perlindungan luar

  • Air terminals, roof conductors and down conductors installed on roofs, parapets and structures.
  • Bonding of metal roofing, gutters, railings and services entering the building.
  • Earth termination network with earth pits and ring earth where required.
  • Test joints and inspection points so the system can be verified later.

Internal protection

Perlindungan dalam

  • Surge protective devices (SPD) at the main switchboard and sub-boards.
  • SPD for data, telephone, CCTV and signal lines where equipment is exposed.
  • Equipotential bonding to limit dangerous voltage differences inside the building.
  • Protection for inverters, EV chargers, lifts and sensitive electronics.

Inspection and upgrade

Pemeriksaan & naik taraf

  • Condition inspection of existing lightning protection after strikes, extension or renovation.
  • Earth resistance testing and continuity checks across the system.
  • Repair or replacement of corroded conductors, broken clamps and damaged earth pits.
  • Documentation and drawings of the as-installed system.

How we work

From survey to handover

STEP 1

Site review

We study roof, structure, services and any earlier strike or surge damage.

STEP 2

Risk assessment

Where required, the risk assessment is carried out by our specialist partner, who defines the protection level.

STEP 3

Installation

Air terminals, conductors, earthing and SPD installed to the agreed design.

STEP 4

Test and certificate pack

Earth and continuity tests recorded, drawings issued and the system documented.

Risk assessment

Risk assessment by a specialist partner

The formal lightning risk assessment, which decides whether protection is needed and at what level, is carried out by a specialist partner. Elektrika handles the electrical and installation side — conductors, bonding, earthing, SPD and testing — so the design is built correctly. See our lightning risk assessment guide for how the process works.

FAQ

Frequently asked questions

Does every building need a lightning protection system?
Not necessarily. The need depends on the structure, location, occupancy and what is inside it, which is why a formal risk assessment is done first. Our guide explains the process.
What is the difference between lightning protection and SPD?
External lightning protection catches and conducts a strike safely to earth. SPDs limit the surges that enter through power and data lines. A building usually needs both for equipment to be protected.
My building already has a penangkal petir. Is it still effective?
Not always. Conductors corrode, earth pits dry out, and renovations can break continuity. We inspect and test existing systems and tell you what needs repair.
Who does the risk assessment?
A specialist partner carries out the formal assessment. We install and test the system to the design that results.
Can lightning protection damage my equipment?
A correctly designed system reduces damage by directing strike energy to earth. Poor earthing or missing SPD can leave equipment exposed, which is why we test and bond carefully.

Get a quote

Get a quote for lightning protection

Fill in the short form — we open WhatsApp with your details prefilled. Or WhatsApp / call us directly.

Protect the building and what is inside. Free site visit & quote.

Free site visit & quote · registered contractor · tested & documented.

Petaling Jaya · Kuala Lumpur · Puchong · Shah Alam · Klang · Subang Jaya · Kajang · Cheras · Ampang · Cyberjaya · Seremban · Kota Damansara · Kepong · Setia Alam · Bangi